PDA

View Full Version : M30 timing wheel


Justin-Redfive
02-06-2006, 06:36 PM
Does anyone know how many teeth are on the timing wheel/balancer for the M30? I can't get a good count. I need to find out whether the stock wheel will work with the stand-alone computer I'm getting, or if it has to be modified.
Thanks.
Scott H
02-06-2006, 07:50 PM
535iTm project but none straight on. This is the best I got and I can't tell if it's 58 or 60 teeth.

http://www.hersted.org/IMG_1086.JPG



Does anyone know how many teeth are on the timing wheel/balancer for the M30? I can't get a good count. I need to find out whether the stock wheel will work with the stand-alone computer I'm getting, or if it has to be modified.
Thanks.
Bill R.
02-06-2006, 08:04 PM
reference point. So there is a tooth every 6 degrees and a gap of 12 degrees.



Does anyone know how many teeth are on the timing wheel/balancer for the M30? I can't get a good count. I need to find out whether the stock wheel will work with the stand-alone computer I'm getting, or if it has to be modified.
Thanks.
Scott H
02-06-2006, 08:25 PM
picture and it was throwing my count off....time to close my eyes for 30mins


reference point. So there is a tooth every 6 degrees and a gap of 12 degrees.
genphreak
02-06-2006, 09:04 PM
picture and it was throwing my count off....time to close my eyes for 30minsLooks damn nice Scott... a lot of good work in there for sure!
Justin-Redfive
02-06-2006, 10:54 PM
From the photo I had I counted 62!. So I'm glad you all corrected me.
BTW, Scott that is a very nice looking engine.