My Seat

[granit_silber]

Hello All,

A few months ago I got rid of the twist from my driver's seat. However, when I reinstalled the seat it was too high and wouldn't come down. When I press the appropriate button I hear clicking (like gears almost engaging). I've finally got some time to fix the problem so

Here's my question...

Underneath the front of the seat there are two motors (#2 in pic). The rear motor adjusts the tilt in the seat and those were the cables I adjusted.

1. Does the front-most motor control the height of the seat?

2. If not, then where do I adjust or what do I replace?

http://www.realoem.com/bmw/diagrams/i/h/39.png



Thanks!
-ashley

[Kalevera]

Yes, follow the motor's cables back to the box(es). Sounds like the cable ends just got unseated.

Good luck, buddy!

best, whit

[granit_silber]

Yes, follow the motor's cables back to the box(es). Sounds like the cable ends just got unseated.

Good luck, buddy!

best, whit

Whit,

Thanks and good to hear from you. How are things in the frozen north?
-ashley