PDA

View Full Version : ::.. Heated Sead thread con't... cut wiring



Qube
12-02-2005, 10:37 PM
Was doing the second part of checking the heated seats and noticed that one of the wires is cut from the harness. I checked on the driver's side and it it definitely supposed to be connected. Can someone with the book check what this wire is supposed to be for (red/green)? Thanks!

Scott H
12-03-2005, 01:32 AM
Grn/Red wires is the power to the seat heater switch on both driver and passenger sides. The gry/blk is the connection to the interior lights, Red/Vio is power to the pass seat switch and brown is obviously ground.

There should also be wht/yel wire going to seat bottom heater and wht/blu going to seat back heater coming out of the switch.


Was doing the second part of checking the heated seats and noticed that one of the wires is cut from the harness. I checked on the driver's side and it it definitely supposed to be connected. Can someone with the book check what this wire is supposed to be for (red/green)? Thanks!

Qube
12-03-2005, 11:15 AM
Hmmm so technically I can try and reconnect the red/green and see if a fuse blows ;) Thanks!