PDA

View Full Version : Just made 100,000km today on my E34....



Kakaire
10-20-2005, 08:13 AM
She still rides nice and quiet. yet ma passion for her grows everyday. And thx alot for the support you guys give here. I have so far fixed these issues while on this board.

1. Fusible link
2. Cut wires on trunk hinge, caused issues with central lock (unlocking upon lock up)
3. Cleaned the ICV and cured hunting Idle.
4. Front end noises.
5. Coolant bleeding
6. etc etc.

thx

Great people here.

liquidtiger720
10-20-2005, 09:53 AM
How did you clean your icv?

uscharalph
10-20-2005, 10:06 AM
She still rides nice and quiet. yet ma passion for her grows everyday. And thx alot for the support you guys give here. I have so far fixed these issues while on this board.

1. Fusible link
2. Cut wires on trunk hinge, caused issues with central lock (unlocking upon lock up)
3. Cleaned the ICV and cured hunting Idle.
4. Front end noises.
5. Coolant bleeding
6. etc etc.

thx

Great people here.
Congrats! Keep up the good work!

romus
10-20-2005, 10:12 AM
yeh, how did u cure the hunting idle??

Lennyz525i
10-20-2005, 11:56 AM
Sweet, at 100K that M20 is halfway to being broken in!

dacoyote
10-20-2005, 12:22 PM
Congrates...... As of about 2 months ago I don't own a single rig under 100k miles... Prop both be over 150k miles by this time next year...

-Charles

Torque
10-20-2005, 12:25 PM
Man, that's like a brand new car compared to mine. Last night I crossed over the 175,000 MILES = 280,000 km.

:)

Lennyz525i
10-20-2005, 01:40 PM
How did you clean your icv?

I sprayed the hell out of mine with carb cleaner. Pretty good result, idle is still a little bouncy every now and then though.

Kakaire
10-20-2005, 10:36 PM
Thx for the replies DIY Engineers. Initially I used to have a Rough/hunting Idle on cold startups, swapped out the ICV with a used one. Hunting Idle lessened, then occasionary Idle revved high about 1200 in Neutal. So I decided to peep in the ICV Poor thing was all coated black inside, and would hardly move. I half soaked it in WD40 took 30 mins to get it look shinny again, I used dust blaster to blow out the dirt, I reconnect it and boy oh boy......ICV is like new now rev in neutral is now about 800 when I engage drive in drops to 500 which I believe is very close to normal.

thx.

moots
10-20-2005, 10:47 PM
Thx for the replies DIY Engineers. Initially I used to have a Rough/hunting Idle on cold startups, swapped out the ICV with a used one. Hunting Idle lessened, then occasionary Idle revved high about 1200 in Neutal. So I decided to peep in the ICV Poor thing was all coated black inside, and would hardly move. I half soaked it in WD40 took 30 mins to get it look shinny again, I used dust blaster to blow out the dirt, I reconnect it and boy oh boy......ICV is like new now rev in neutral is now about 800 when I engage drive in drops to 500 which I believe is very close to normal.

thx.

At 100kkm,it's barely broken in.I've clocked 450kkm.Changed the engine with a used one at 350k coz of cylinder head issues.Still runs like a champ with a reachable top end of 220km/h with the rev at 6.5k (cut out rev).Enjoy...