PDA

View Full Version : Stiff Steering Issue



afxjzs
09-21-2005, 11:06 AM
I recently bought an 1992 525i that had some work done to the front end before i picked it up. it had new control arms and struts put in. However, for some reason, now the steering is stiff as all hell. it takes to hands to make a right-angle turn and it won't return to center.

I checked out the articles on http://www.bmwe34.net, but i still have some questions...

in this article: http://www.bmwe34.net/e34main/trouble/steeringplay.htm

It says it is possible to over tighten that nuts which makes steering stiff. i don't get how that would stiffen the steering, its just one nut that does touch any moving part.

and in this article: http://www.bmwe34.net/e34main/maintenance/steering/steering_box.htm

it mentions first unbolting a screw, and then adjusting the allen nut. "unscrew the nut # 13 and turn the screw 1/4 of a turn" and "Take a flat file..and with any sharp edge on the file..score a mark on the top/end of the steering box adjustment allen screw so you can keep track of clocking....very easy to get lost without a mark after you loosen the 17mm collar locking nut." im guessing the colar nut is just something that holds the allen bolt in place, but i don't wanna go messing around with this if i am not sure.

Here are the symptoms:
- Steering is equally stiff at any speed.
- There is about 10 degrees of play where it is easy to turn, but anything more than that is tough
- If i am going around a long corner, like an on ramp, it is stiff to turn the wheel to make the turn, but once the wheel is turned for a few secs, then there is 10 degrees of play from where the wheel is located and it is stiff to straighten out.

if any of this rings a bell to an obvious problem, i'd love to hear about it.
thanks
__________________
__
dr

McWatters
09-21-2005, 02:35 PM
Hey afxjzs, i have the exact problem with my 535i, i however described it as "chunky" stearing, i like ur details better, heres the list of replies i got from my post, ( i havnt had time to try any of the ideas so sorry i cant give any imput on what to choose

http://www.bimmer.info/forum/showthread.php?t=13158&highlight=chunky

cheers hope this helps

J.McWatters

632 Regal
09-21-2005, 03:09 PM
the steering worm adjusting allen is too tight probably a lame attempt of curing the play it has. Loosen the allen after loosening the check nut a turn or 2 but before you do that cake sure the steering column nut under the dash is tight so that it doesnt have any play. If that is tight and the column shaft is tight, and the universals going to the steering box are tight then its most likly the steering box is wasted.