Where can I find this part?

[1995 525i]

I saw it on a M5 bt I don't know where to get it. Tried BMA, Bav Auto and BMW Motorsports. Any ideas? Also, has anyone changed out their door handles? Was it hard?

http://img393.imageshack.us/img393/60/doorhandle1sk.jpg

Thanks,

Boz

[shogun]

152.00 EURO per piece.
Stück(nur 1 Griff) Türaussengriff mit Schloss.Das Schloss ist passend zu Ihrem Fahrzeugschlüssel.
Per piece (only one handle) outer door handle with lock. The lock will be fitting to your car key.
http://www.sanituning.de/catalog/images/catalog/large/BMW%20Motorsport%20Tuergriffe.jpg
From Sanituning in Germany
http://www.sanituning.de/catalog/product_info.php?cPath=2&products_id=46&osCsid=114b3acd298c986323d6997178c6e403

Removing them is easy. There is a small hole in the side of the door at the level of the door handle, covered by a rubber seal. Remove the rubber seal, use a flash light and you will see a lever inside. Push that one towards front of the car. Remove the outher door handle cover from outside. Then you will see 2 screws underneath and so forth.
Online spare parts catalog will help you how to do.

[1995 525i]

152.00 EURO per piece.
Stück(nur 1 Griff) Türaussengriff mit Schloss.Das Schloss ist passend zu Ihrem Fahrzeugschlüssel.
Per piece (only one handle) outer door handle with lock. The lock will be fitting to your car key.
http://www.sanituning.de/catalog/images/catalog/large/BMW%20Motorsport%20Tuergriffe.jpg
From Sanituning in Germany
http://www.sanituning.de/catalog/product_info.php?cPath=2&products_id=46&osCsid=114b3acd298c986323d6997178c6e403

Removing them is easy. There is a small hole in the side of the door at the level of the door handle, covered by a rubber seal. Remove the rubber seal, use a flash light and you will see a lever inside. Push that one towards front of the car. Remove the outher door handle cover from outside. Then you will see 2 screws underneath and so forth.
Online spare parts catalog will help you how to do.
Thanks!

[uscharalph]

152.00 EURO per piece.
Stück(nur 1 Griff) Türaussengriff mit Schloss.Das Schloss ist passend zu Ihrem Fahrzeugschlüssel.
Per piece (only one handle) outer door handle with lock. The lock will be fitting to your car key.
http://www.sanituning.de/catalog/images/catalog/large/BMW%20Motorsport%20Tuergriffe.jpg
From Sanituning in Germany
http://www.sanituning.de/catalog/product_info.php?cPath=2&products_id=46&osCsid=114b3acd298c986323d6997178c6e403

Removing them is easy. There is a small hole in the side of the door at the level of the door handle, covered by a rubber seal. Remove the rubber seal, use a flash light and you will see a lever inside. Push that one towards front of the car. Remove the outher door handle cover from outside. Then you will see 2 screws underneath and so forth.
Online spare parts catalog will help you how to do.
I've never seen those!

[1995 525i]

I've never seen those!
Don't get too excited, they are expensive as hell. $180 bucks a piece. I don't think I want them that bad. Perhaps we could find some one here who can get them for us for a whole lot cheaper. Perhaps if we ordered in bulk, then Bruno might be able to get us a substantial discount?

[Jay 535i]

Man, you guys are nuts. If your car came with those embossed handles, you'd be lining up to pay $180 to swap 'em for the plain ones.

:p

[1995 525i]

Man, you guys are nuts. If your car came with those embossed handles, you'd be lining up to pay $180 to swap 'em for the plain ones.


:p
Probably but I am not swapping anything for that kind of money. I mean Why would i spend $800 for door handles and keep my crappy rims? I would use that money for something more pratical like 18" replicas.

[DanDombrowski]

$40 for a dremel and a stencil :)

[1995 525i]

$40 for a dremel and a stencil :)
Good Idea Dan!

Boz

[uscharalph]

$40 for a dremel and a stencil :)
I've been meaning to buy a dremel.

[1995 525i]

I've been meaning to buy a dremel.
Me too but I would just f#%k up the door handle if I tried to etch something into it. I think I'll try it this weekend. I am going to try and find a stencil and use my father in law's dremel.

[mattyb]

if i had the money spare i would get them, me likey very much

[1995 525i]

if i had the money spare i would get them, me likey very much
Me too. I am seriously going to try it myself. god help me.

Boz

[brodee]

Fot that kind of money I'd shave my handles off and put in some solenoids. I've been seriously thinking of doing it anyway, would look so much cleaner on a white car.

[Jay 535i]

Fot that kind of money I'd shave my handles off and put in some solenoids. I've been seriously thinking of doing it anyway, would look so much cleaner on a white car.

You could paint your handles white. I just saw Bruno's race car, which he just had painted, trim, door handles and all. Looks awesome.

[1995 525i]

Fot that kind of money I'd shave my handles off and put in some solenoids. I've been seriously thinking of doing it anyway, would look so much cleaner on a white car.
That sounds like one more thing to mess with the mojo of the electrical system, which seems a bit flaky in these cars when stock.

[pyro]

i don't kno how you would make a templet... i have a extra handle so ill try it if someone can tell me how they would make a templet

[1995 525i]

i don't kno how you would make a templet... i have a extra handle so ill try it if someone can tell me how they would make a templet
I found some online...Just numbers and letters. I thought about doing something simple like "E34"