Drive Shaft Clamping Sleeve

[Crewblunts]

Hi all,
I am having a problem finding what I need to do to remove the clamping sleeve. The bentley's tells me to spin the clamping sleeve. I don't see what the book shows. The support for the center bearing was shot so I tore the bushing out of the way. I have some pictures of the center of the driveshaft below.

http://img389.imageshack.us/img389/9044/p1010134small8wl.jpg
http://img389.imageshack.us/img389/5637/p1010135small8ic.jpg
http://img385.imageshack.us/img385/875/p1010136small9su.jpg

Any help would be greatly appreciated. Thanks in advance everyone

Regards,

Phil V in CT

[Bill R.]

remove the driveshaft from the car and then remove the bolt that goes into the end of the Ujoint yoke in the middle to separate the the 2 driveshaft pieces...




Hi all,
I am having a problem finding what I need to do to remove the clamping sleeve. The bentley's tells me to spin the clamping sleeve. I don't see what the book shows. The support for the center bearing was shot so I tore the bushing out of the way. I have some pictures of the center of the driveshaft below.

http://img389.imageshack.us/img389/9044/p1010134small8wl.jpg
http://img389.imageshack.us/img389/5637/p1010135small8ic.jpg
http://img385.imageshack.us/img385/875/p1010136small9su.jpg

Any help would be greatly appreciated. Thanks in advance everyone

Regards,

Phil V in CT

[Crewblunts]

thanks a million Bill!!!