clutch problem

[grave77]

I just have a small problem with my clutch ... it doesn't release the clutch after some time driving ... as if it lost oil pressure off the slave cylinder. any advice?

[Adnan]

Hi,

Compliance in the system can come from three places - leaky master cylinder, leaky slave cylinder or a leak in the system. A flex hose that expands like a balloon can also cause high compliance.

I would begin by checking for brake fluid leaks. For good measure, bleed the system and change the fluid as there may be air/debris in the system. If there are no leaks, the cylinders are suspect. Probably best to replace both.

Regards,
Adnan