PDA

View Full Version : New plugs on 95 M50 -easy



Russell
07-09-2005, 03:17 PM
I just installed plugs in my 95 M50. Yes I used the correct Bosch plugs. The old plugs were in for about 31,000 miles. All six had light tan deposits with a slight greenish tint. I used mostly Chevron 93 gas . The electrodes were eroded on the both sides a bit. The original Bremi coils and plug connectors looked fine.

As I had the valve cover gasket replaced 31,000 miles ago I was surprised to find a very small amount of oil in the plug wells. Not sure, a small amount of oil means anything. Even so, I may change the gasket next plug change.

Anyway, just an observation as this is the first time I have changed the plugs myself on this car. It started and idled perfectly

TIA

mbogosia
07-09-2005, 04:41 PM
Good to know. I will change my plugs on my 95 M50 in the next couple of months for the first time. I figured it would be easy, but just haven't looked into it yet.