Need help w/ windsheild washer problem

[Jason]

I have replaced the pump, cleaned the reservoir, shot air through the hoses to unclog anything, cleaned the nozzles w/ a pin and put new fluid in. The best i can get is a little dribble out of the right one and weak spray from the left one. They are properly attached. Am I missing anything? I would love to have proper use of them again. Unfortunately I have to prep the car for sale and I want to make sure everything works. Thanks in advance.
Regards,
J

[zygoteer]

similar on mine, but maybe not the same ... the tubing where it transfers to the bonnet (hood in US-speak) was almost flattened and set rigid like that (due to age I guess) ... new tubing = great washers now

[Kalevera]

You're selling your 5?! :(

I'm sure there are about 10 million people who would like to buy those wheels.

[632 Regal]

jason try to disconnect one of the hoses and see if it pumps to that point. I cant get a pin in my squrters cause its too big, they could be clogged.

[BobHarris]

Pop the bonnet and have a look at the lining right under the nozzle if it is wet then you have a leak in the non return valve thingy, which is hidden behind the lining