Identify wiring connector please

[duckloads]

Please identify a wire connector / harness on my '91 535i. It has a flat connector in a bracket mounted on the block under the oil filter. The wire bundle has a silver tag on it that I cannot read. It is a 3 or 4 wire flat connector. What do the wires go to?

Thanks

[duckloads]

bump

[Kalevera]

Got a picture?

[Mobius]

I tried looking, but I can't find the plug you're referencing.

Mounted on the engine block UNDER the filter? I got nothing there...

[duckloads]

Thanks a bunch for the effort. The wire connector is mounted in a sheet metal bracket (small) attached to a cast aluminum bracket(big) bolted to the block at a point beneath the oil filter. I'll try to figure out how to post a picture if that explanation doesn't help.

Thanks, '91 535i

[Mobius]

So it's mounted to the engine mount? That's the only cast aluminum bit in that area..

Lemme go check again.

Ah. All I can tell you without getting the car up and pulling the plastic shield pan off is that one end joins with a bundle from the alternator and heads aft, the other end drops down below where I can see.

It possible it's the oil level sensor, maybe.

[Javier]

3 wires, black.

Javier

Links to missed pictures:

http://www.bimmer.info/forum/attachment.php?attachmentid=956&stc=1
http://www.bimmer.info/forum/attachment.php?attachmentid=957&stc=1

[winfred]

that's the only thing i can think of in that area with more then 2 wires


It possible it's the oil level sensor, maybe.

[duckloads]

Thanks guys. That's it. I had a little corrosion in that connection, and I had hoped it was causing my intermittant rough running problem.