5HP18 Valve Body rebuild question

[shogun]

ZF 1043 226 028 VALVE, ZF 1043 226 028 VENTIL looks like you can order it from Germany http://en.technikexpert.net/zf-1043-226-028-valve.html
5HP18 Valve Body – Valve Housing Groups, position item # 51.200, part number 1043 226 028, Valve 1 piece, used in Stuecklistennummer 1056 000 081/087/088

[Frank87]

I have ordered that part but it comes WITHOUT a ball. It just gives me the plant pot, spring and cap.

[whiskychaser]

I have ordered that part but it comes WITHOUT a ball. It just gives me the plant pot, spring and cap.

Hi Frank
Where are you and where did you order the part from? No joy with the contact in Shogun's post? If you are in the US you could try Eriksson Industries. Pretty sure somebody on a Russian website had about 100 of them so probably has one or two to spare:-) That is assuming online translation worked. Will try to find the link if you still need it
You are in a Catch 22 situation with the pressure regulator. If it is worn, it can potentially blow your D/G clutch. But if you take it apart to inspect it, you screw up the settings. You are probably best leaving it alone as Shogun says. I don't believe you can bench test it at home but you should be able to test the line pressure at the tappings when it is installed