GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 10 of 55

Thread: Cold air on passenger side

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,253

    Default

    as I had a similar problem with no air from vents, I investigated further on my car and we found no broken stepper motor mount, but the stepper motor did not hold in place with the clips, so we fixed it with zip tie, works like a charm now.
    Have made a youtube on my spare IHKA unit to show how the flaps work

    How it works aircon top flap control - YouTube

    Stepper motor IHKA picture by shogun_bucket - Photobucket
    Applies to defroster flap and temperature regulator flap, 2 actuators per car

    stepper motor IHKA picture by shogun_bucket - Photobucket
    Only applies to leg room flap, rear flap, air re-cycling flap and fresh air flap. Six actuators per car

    http://www.bimmerboard.com/members/h...m%20holder.jpg

  2. #2
    Join Date
    Jan 2007
    Location
    Dayton Ohio
    Posts
    1,483

    Default Wish there was a way

    Wish there was a way of installing the replacement arm without having to tear the dash apart

    Quote Originally Posted by shogun View Post
    as I had a similar problem with no air from vents, I investigated further on my car and we found no broken stepper motor mount, but the stepper motor did not hold in place with the clips, so we fixed it with zip tie, works like a charm now.
    Have made a youtube on my spare IHKA unit to show how the flaps work

    How it works aircon top flap control - YouTube

    Stepper motor IHKA picture by shogun_bucket - Photobucket
    Applies to defroster flap and temperature regulator flap, 2 actuators per car

    stepper motor IHKA picture by shogun_bucket - Photobucket
    Only applies to leg room flap, rear flap, air re-cycling flap and fresh air flap. Six actuators per car

    http://www.bimmerboard.com/members/h...m%20holder.jpg

  3. #3
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,253

    Default

    Quote Originally Posted by shogun View Post
    as I had a similar problem with no air from vents, I investigated further on my car and we found no broken stepper motor mount, but the stepper motor did not hold in place with the clips, so we fixed it with zip tie, works like a charm now. Have made a youtube on my spare IHKA unit to show how the flaps work
    How it works aircon top flap control - YouTube
    Stepper motor IHKA picture by shogun_bucket - Photobucket
    Applies to defroster flap and temperature regulator flap, 2 actuators per car
    stepper motor IHKA picture by shogun_bucket - Photobucket
    Only applies to leg room flap, rear flap, air re-cycling flap and fresh air flap. Six actuators per car
    http://www.bimmerboard.com/members/h...m%20holder.jpg
    Update: 3 years later the zip tie repair on my stepper motor bracket still works perfect. Advantage is that not many parts have to be removed to repair this. Just the radio came out and some covers outside center console next to the aircon unit and the cover under steering wheel, and one needs slim and flexible fingers to reach the stepper motor then.

Similar Threads

  1. Passenger Sdie Aircon blowing hot air when select cold
    By dreman77 in forum 5 Series BMW
    Replies: 13
    Last Post: 03-09-2009, 09:06 AM
  2. Passenger side or drivers side
    By Kibokojoe in forum 5 Series BMW
    Replies: 2
    Last Post: 11-23-2008, 09:17 PM
  3. Passenger side speakers go out
    By CharlesAFerg in forum 5 Series BMW
    Replies: 2
    Last Post: 09-27-2006, 09:23 AM
  4. E32 LKM - passenger side low beam
    By trimagna in forum 5 Series BMW
    Replies: 1
    Last Post: 03-22-2004, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •