Quote Originally Posted by 632 Regal View Post
Fuel line from tank, the pressure one to the dual filters. Can it just be pulled out and replaced or is it mounted or clamped in some way?

My pressure line just before the fuel filters started spraying fuel along a 3 inch area. I cut that and temporarily spliced a piece in. The hose looks new but clearly dry rot along the side. Ordered hose and clamps but wondering if I can fish the new hose in or if I need to drop the tank. Any input appreciated, I replaced a tank many years ago but don't remember.
Hi Jeff, I'm pretty sure you're fine to remove and replace via the pump access panel and from underneath behind the axle/in front of the tank. Only lines mounted to the tank are the steel breather lines. Old fuel can take a toll of course. I hope she doesn't get all difficult about having her plumbing plundered, and you can enjoy your time under there :-)