Looks nally dude
You have to nail the bend in the hose and its length of course- Are you going to get an L fitting for the bottom of the FPR?
I am trying to install this at the moment. It goes on the stock location of the old fuel pressure regulator. I had to get some longer fuel hose. I am going to hook up a fuel pressure gauge soon.
It was leaking though. I ran the car and petrol was coming out. A second time I put some plumbers tape on the fitting thread. It was leaking still but not as much as before. I will try tomorrow and look to install a new fuel pump too.
Looks nally dude
You have to nail the bend in the hose and its length of course- Are you going to get an L fitting for the bottom of the FPR?
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
I will try. I haven't found one yet though. The thread is M14x1.5. This is the manufacturers fitting http://www.napaonline.com/Catalog/Ca...928_0412991622
The hose will kink if I currently make it shorter.
Hi ya Big K, can u tell me about this device - adjustable fuel pressure regulator. I just got me a 535ia exec and im curious about the adjustable part of the system. what does it do?
thanks Big K
p.s think I just bought another e34 that makes 3, oh ****
Looks good Kris. Thanks for posting. I see you got an additional temperature sensor there.
deleted air conditioning
I installed this today. You can see the video here. http://youtu.be/kq2chxCZZts
I purchased some fittings to make it work. M14x1.5 to -4AN, then a -4AN 90 degree bend, then a -4AN 180 degree barb that goes to the return line. The M14x1.5 fitting was leaking so I put a fuel injector o-ring in there that I cut out a bit to make smaller. It stopped leaking after that. I also added some loctite 567 to these threads.
I then adjusted the fuel pressure to 42 psi on the gauge with the vacuum hose off and on it goes to around 37 psi.
Looks good.
deleted air conditioning