GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 10 of 11

Thread: Finished changing both valve cover gaskets,

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2008
    Location
    Sweden
    Posts
    572

    Default Finished changing both valve cover gaskets,

    used http://www.permatex.com/products/Aut...sket_Maker.htm to seal it up well and for ease of reinstallment of the covers, got rid of 98% of the hesitation/stutters I had @ cruising speeds due to soiled plugs and sockets!

    Now my question is: Iīve changed plugs, checked the sockets, changed fuel filter and pump/sender unit, no apparent holes in any hoses and Iīve cleaned the ICV for good measure.. Only thing I havenīt done yet is a reset of the computer!
    I still have a very slight stutter/hesitation occasionally (much much better compared to before but still) when cruising, so where do I look now?
    Last edited by Bo525i; 09-20-2009 at 11:34 AM.

    CD43,Style 21s,K&N Insert,White blinkers,LED 3rd brakelight,HIDs,front Monroe sportsshocks/Weitec 35 springs,540 Calipers, Zimmermann Discs and Textar pads.

Similar Threads

  1. well finished my other valve cover gasket
    By markus in forum 5 Series BMW
    Replies: 2
    Last Post: 07-01-2007, 11:24 PM
  2. M60 valve cover gaskets this weekend
    By markus in forum 5 Series BMW
    Replies: 4
    Last Post: 03-24-2007, 06:22 AM
  3. replacing valve cover gaskets
    By markus in forum 5 Series BMW
    Replies: 5
    Last Post: 02-04-2007, 12:42 PM
  4. Valve Cover Gaskets
    By hinchcliffe in forum 5 Series BMW
    Replies: 15
    Last Post: 01-01-2007, 04:19 PM
  5. Valve cover gaskets - replace or not?
    By pingu in forum 5 Series BMW
    Replies: 3
    Last Post: 05-27-2006, 10:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •