the forward and back motor is all by itself and connected to the shaft that runs from one side to the other
along the tracks? im referring to movement toward and away from the driver's seat, not up and down or recline motions. 2 of the rollers fell out of the seat switch, and a replacement hasn't arrived from ebay yet. neither has the gearbox, for that matter, so this is for when i put in the gearbox. seat will be in full forward, no recline position when the box is replaced, so figuring out how to back it off enough for me to fit behind the driver's seat is kinda important to me. thanks.
Last edited by ryan roopnarine; 10-04-2005 at 06:16 PM.
the forward and back motor is all by itself and connected to the shaft that runs from one side to the other
all america wants is cold beer warm cat and a place to take a poop with a door on it
just power the motor directly
all america wants is cold beer warm cat and a place to take a poop with a door on it