Originally Posted by
rickm
Installing the BMW ETK/TIS
TIS – Technical Information System (10/01)
ETK – Electronic Parts Catalog (03/02)
Insert the ETK CD into your CDROM drive. Go to X:\WIN95\BMW\ETK (where X is the letter of your CDROM drive) and run SETUP.EXE. This installs the SYSADM part. (It will ask you if you want to put a shortcut on your desktop; if you do, you can access it from the SYSADM icon. If not, it will be accessible from START/PROGRAMS/BMW95/Sysadm.)
Next you want to run the SYSADM tool and install the ETK/EPC portion.
This part may take up to 20 minutes so be patient as it will put all of the data on your hard drive. You’ll need to have at least 450MB free.
Then, from the SYSADM application install TIS.
You will be asked if you want to install the TIS to run from the hard drive or CDROM drive. If hard drive, make sure that you have 490MB in addition to the 450MB required by the ETK. Additional questions may be addressed in the README files provided with the CD.
NOTE: Software works best at 1024x768 screen resolution.