Try a windshield repair shop. They have glue made for the purpose.
hit my rearview mirror this morning and it broke away from the screen.its just hanging there by the wires.
tried sum 5 minute hduty contact but didn't do it
can someone give us an idea on how to fix
Try a windshield repair shop. They have glue made for the purpose.
1997 535i V8
5spd, OBC, A/C, cruise, BMW phone, factory M-Tech wheel & suspension, 18" Alpinas
So does any Wal*Mart or auto-parts store, for a couple of bucks. You'll need to pop the part that attaches to the glass out of the mirror and glue it to the windshield, letting it dry the proscribed amount of time, before snapping the mirror back on the mount. Draw the location for it on the outside of the glass with a marking pen so you get it in the right spot (I've seen many of them installed too low) and then clean the glass thoroughly before using the glue. I'm guessing you have a non-BMW-OE windshield in the car which usually means the glass shop reused the mounting base and glued it to the after-market windshield. I've never seen an OE mount come loose and they come mounted on the BMW-OE replacement glass. Just curious if that's the case in your situation. Good luck.Originally Posted by DaveVoorhis
I will keep this in mind next time i decide to use my mirror as a speedbag.
Lowered with blue h&r(?) springs, Bilsteins, tint, 19# design 3 injectors, Dual Magnaflow
southwest WA
thanks tried the five minute araldite but mirror was to heavy for it to set windscreen guy had glue that set like a rock in about 1 minute and only charged 10 dollars.
however as soon as we unpluged it the alarm went off and we couldn't stop it until we reconnected
Just in case others attempting to learn from this thread miss the point, allow me to repeat myself:I have no idea what "araldite" is but for about $2 you can by a kit of cleaner and adhesive specifically for glass-mounted rear-view mirrors in the U.S.You'll need to pop the part that attaches to the glass out of the mirror and glue it to the windshield, letting it dry the proscribed amount of time, before snapping the mirror back on the mount.
Conversely, I had a car on which the rear-view mirror had been installed too high. As a result it interfered with the sun visors as they were lowered. Just another point for a DIY-er to be aware of.Originally Posted by BMWCCA1