actually one sec.. what about that little shudder when i was accelerating from standstill? any idea what that would be?
actually one sec.. what about that little shudder when i was accelerating from standstill? any idea what that would be?
-inc
'91 e31 850
'90 e34 535
'02 CBR F4i stunt/track bike
'07 gsxr 750 stunt bike
bad/out of line center bearing on the driveshaft, bad u-joint/flex coupler or bad tranny mounts is the usual cause
all america wants is cold beer warm cat and a place to take a poop with a door on it
hmm had all the driveshaft stuff done over a year ago.. and the problem isn't recurring.. it just did it that once.. what i was looking for was whether there's any relation to the current problem i am having? :o
Originally Posted by winfred
-inc
'91 e31 850
'90 e34 535
'02 CBR F4i stunt/track bike
'07 gsxr 750 stunt bike
Hey Adam -- since they pulled the tranny to rebuild it, thereby requiring the removal of the driveshaft, there's the potential that it was either mishandled or not properly installed. Specifically, the center bearing has to be preloaded about 5mm towards the trans. They might've forgotten to do that part
best, whit