Does either have the electronic throttle? Otherwise, the m30b35's are universal with the motronic 1.3 DME ending with 179.
Hi Guys,
I have an e34 535i and an e32 735i M30 engine, would like to know if there is a defference between the engine harness and if anyone would have the pinout diagram of the same harness round plug C101.
Both engines are supposed to be the m30 b35.
Many thanks,
Raph.
Last edited by Turbo Ready; 11-07-2006 at 02:48 PM.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3
Does either have the electronic throttle? Otherwise, the m30b35's are universal with the motronic 1.3 DME ending with 179.
erased due to slander
Martin, they both have throttle cables, mechanical.
I am doing an m30 transplant into my 87 325is e30. I would like to configure the C101 to work with the chassis harness on the e30.
Thanks for the reply.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3
WOW, I have not checked through the entire list, but thanks so much for the link. Tons of info there regardless if it has what I am looking for or not, nice info.Originally Posted by shogun
Thanks again.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3
Thats my dream one of these years...let us know how it goes!Originally Posted by Turbo Ready
NovceGuru
1993 525iA M50TU
Black on Black...need pics
208,888 miles
There are all E32 wiring diagrams, pinouts etc. by built year under electronics
'electr. troubleshooting manual'
Thanks Dude, I am actually on that PDF now.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3
This has been my plan for a few years as well, but with a new house 2 years ago, setting up back the new garage and working on other people cars, time went by.Originally Posted by NovceGuru
I had turbocharged my e30 m20 but this is my dream as well.
My e30 is in mint condition and I just pulled an m30 from wrecked 89 e32 with only 85,000 miles on it. I will still pull the head, do a mild port and polish, decarbonise, ARP head bolts and put it back togeather.
I am also doing a 5 lug conversion/swap with coil overs.
I just finished painting the engine bay, which was 99% rust free.
Will send you links to my website as I upload.
Cheers,
Raph.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3
I am looking for an illustration like this but for the m30.
Guess I will have to trace the circuit diagram on the PDF manual hosted on the BMW E32 & series website.
Last edited by Turbo Ready; 11-07-2006 at 11:00 PM.
BMW, THE ULTIMATE FLYING MACHINE
SPEED AND POWER IS NOTHING WITHOUT CONTROL,
THANK THE GERMANS, BMW HAS ALL 3