Reply With Quoteits just a pita to get it out without breaking the clip holding it in.
Major Contributor
Quick question: To clean ICV on m50, does the intake manifold have to be removed? NT
Nt
3 Grand Master
noooo...
its just a pita to get it out without breaking the clip holding it in.
Major Contributor
No worries, mines is already broken. Just can't recall the icv location from memory.
3 Grand Master
its the
thing that would be attached to the snorkel hose coming off the intake manifold here, and the silver oriface in the bottom half (is it)
Major Contributor
Oh shoot, the injectors need to be removed for that? Job looks messier by the minute.
3 Grand Master
no they dont....
that's just a pic i took when i was trying to do my headgasket, its just clearer than if the intake manifold were (fixed) normally in position. no removal is necessary, just small hands.
Super Moderator
Check here on Brett Anderson's site for the procedure with the manifold on.
Check here
Originally Posted by Anton CH.
Major Contributor
Intresting aproach, thanks for your help guys!
Posting Permissions