Hey Guys, Have a bit of a problem here and I can not firgure out what I should do next. I'm replacing the fuel pump on a 89 525. I have never missed with the fual tank since I have had the car. I remove the cover in the trunk to acces the tank...Here's the kicker...one of the studs on the tank is snapped off...ok no biggie. I go to loosen the remaining nuts to remove the cap to access the pump and 3 of the nuts just spin....i can't loosen or tighten. I tried vise grips and pulling up on the nuts hoping they would catch threads...no luck =[ You guys have any ideas???
TIA,
Tucker
Last edited by Tucker; 12-06-2004 at 09:08 PM.
wow... have to think about this one. I hate that.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy