Reply With QuoteIt can be O2 sensor cable. O2 sensor cable runs from jonction on left side of engine to sensor located in exaust pipe right before catalytic converter box.
Grand Master
part identification...
Hey guys. i know the picture is small, but all i had at the time was my camera phone.
could you guys identify where that peice of wire is suppose to be and its purpose?
it is located on the drivers side rear sway bar. TIA
www.KaRealtySF.com
Build Date: 05-1995 /Engine: m50tu /Automatic Transmission /ABS /NO ASC /Open Differential /EAT Chip
It can be O2 sensor cable. O2 sensor cable runs from jonction on left side of engine to sensor located in exaust pipe right before catalytic converter box.
5-10 Grand Master
it looks like the goofey exhaust vibration damper that came in the later cars, most were long ago thrown away, the wire is a safety measure to keep it from flying through someones windshield when it falls off, best guess from the crappy picture
all america wants is cold beer warm cat and a place to take a poop with a door on it
Grand Master
definietly not o2 sensor cable.
i think ill have to agree with winfred. since that big plate thing is connected to the exhuast.
how come they were thrown away?
www.KaRealtySF.com
Build Date: 05-1995 /Engine: m50tu /Automatic Transmission /ABS /NO ASC /Open Differential /EAT Chip
5-10 Grand Master
crap in the way
Originally Posted by liquidtiger720
all america wants is cold beer warm cat and a place to take a poop with a door on it
Posting Permissions