GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 4 of 4

Thread: Need specific values of torque?

  1. #1
    Join Date
    Aug 2004
    Location
    Argentina
    Posts
    63

    Default Need specific values of torque?

    hi, i need to know the specific value of torque that is messured in Kg or degrees. I dont know how is the conversion.
    Any suggestions about putting back the head, and those details such as cleaning the block holes would be appreciated.
    Thanks again.

  2. #2
    Join Date
    Dec 2003
    Location
    Austin, TX
    Posts
    1,181

    Default

    1995 540iA M-Sport - 76k miles. 1 of 1 auto AW3 cars.
    1995 540i/6 - Misc Parts donor for above.

  3. #3
    Join Date
    Aug 2004
    Location
    Argentina
    Posts
    63

    Default

    thanks, but i need the specific torque value. Useful link!!

  4. #4
    Join Date
    Dec 2003
    Location
    baton rouge, loserana
    Posts
    6,922

    Default

    m20s and m50s on the head bolts are, 1st stage 22 foot pounds, 2nd stage 90* (1/4 turn), 3rd stage 90*, start from the center of the head and work out in a cross pattern, on m50s the 3 little inverted torx that go into the timming cover through the head are 89 inch pounds (id cut that in half and do it in two stages), but a 89 should be a m20 sohc motor and not the c m50
    all america wants is cold beer warm cat and a place to take a poop with a door on it

Similar Threads

  1. Torque Values
    By puck1 in forum 5 Series BMW
    Replies: 3
    Last Post: 05-29-2006, 08:02 PM
  2. Need help with torque values on VW 2.0 litre
    By Steven G in forum 5 Series BMW
    Replies: 2
    Last Post: 02-16-2006, 08:11 PM
  3. torque adjustment values for 520i e34
    By Juan in forum 5 Series BMW
    Replies: 2
    Last Post: 07-29-2005, 01:35 AM
  4. Need Torque Values For Rear Dog Bones
    By Pwr2spare in forum 5 Series BMW
    Replies: 3
    Last Post: 11-24-2004, 07:03 AM
  5. 6 series 633csi control arm torque values?
    By Bruno in forum 5 Series BMW
    Replies: 2
    Last Post: 08-16-2004, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •