Okay... Another fun update without pictures as usual. I got the clear off finally and filed the rash down figuring I'll sand the lip and barrel down to polish. I sanded the file marks smooth and started to sand the lips with 400, not cutting at all. Almost like the surface is a thick paint, you can see the difference where I filed it smooth right next to the factory finish. Where I filed is aluminum shiny but the finish is not budging at all. It does however clog the sandpaper pretty easy.

I then tried 320 grit which should do the job with no effort. Wrong, it kinda isn't doing anything but freak me out about what I may be getting into. Regular bare aluminum alloy would not have such an issue. I am afraid of going coarser and that not doing the job then what? If it does kinda work but not all the way these will have to be painted all over and look like garbage. I wish I had a spare wheel to experiment with.

I will try wet sanding tomorrow and see if that works. If not then we go to the 220... then 150... 80? Take the grinder with 36 grit?

I'll post some pics tomorrow? LoL I put a posty note on the middle of my monitor, that should remind me.