Which system? This? http://bmwe32.masscom.net/ivo/remote...e_install.html
or this? http://bmwe32.masscom.net/johan/remo...e_locking.html
Guys,
got 2 original keys with the car. Central lock never worked by remote. Key programming procedure pointing at the inside mirror no longer works.
2 years ago, I tried programming both keys for central locking but everytime I succesfully programmed 1 key, the other key would stop working on remote lock.
Now, the mirror procedure doesnt work at all. Keys are fine, batteries are fine.
Do I need to reset something in the cars DWA to make the mirror procedure work again?
First one with IR mirror. That initialization lock looks plausible. Time to get INPA/DIS out.
Ok situation is about solved.|
INPA was used to reset the initialization block. I was still not able to program my keys.
I replaced my mirror with another mirror (IR receiver is in the mirror). I now have an auto-dimming mirror and can exclude my old IR receiver as troublemaker so its an upgrade at the same time.
I waited a day before I tried to initialize again and I succesfully initialized 1 key. Since I did not have my spare key with me, I just have 1 key with remote for now.
I will now arrange for 2 more keys from a junker, replace the cuts with an uncut bar and make 4 keys with remote cut to my locks. I will then (just in case) use INPA again to reset the initialization and will program all 4 of them one after the other.
This should fix 4 keys (max is also 4)
Possibly, the IR receiver went bad (POSSIBLY) since I was not able to initialize even 1 key after INPA reset. Changing the mirror solved that.