GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Looking for a decent steering box for 91 525

  1. #1
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default Looking for a decent steering box for 91 525

    I posted in the classified section, but I'm afraid its rarely visited.

    Anyhow, I'm hoping someone has a lower mileage unit without play in the centre. Mine is way over the hill....

    Thanks for reading,

    Dave

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    Wish I had a little 6 instead of the monster V8. My box is real bad, reminds me of one of those antique cars at the theme parks. Any clue if yours is servotronic (?) or not? I dont even have enough room to look at the box in mine.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default

    Ha, I don't envy you. If you drop something in your engine bay, it may not hit the ground, ever Mine is easy to see, its not servotronic (no wires to it).

    It might be a good small business to get a proper bmw steering box rebuild going, with gears et al. Its getting more difficult to find boxes in any state of repair and I'm not sure I trust the shiny new new ones on ebay they call re-manufactured.

    Anyhow, if you know of any good sources, lemme know.

    Thanks Jeff,

    Dave

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  4. #4
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    Apparently the ebay rebuilt ones have actual new parts in them. We had a discussion a while back regarding this and they do make replacement parts that they use in them. Other than that it's trying to find low mileage usits via craigslist and ebay or junk yards. We have a pick a part here and they have one, haven't seen the car yet but it also has the V8 so it's not an option lol.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  5. #5
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default

    Quote Originally Posted by 632 Regal View Post
    Apparently the ebay rebuilt ones have actual new parts in them. We had a discussion a while back regarding this and they do make replacement parts that they use in them. Other than that it's trying to find low mileage usits via craigslist and ebay or junk yards. We have a pick a part here and they have one, haven't seen the car yet but it also has the V8 so it's not an option lol.
    Hmmmm, new gears? I'd pay a few $100 bucks for my steeering back. If I do, I'll be sure to report back to the board.

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  6. #6
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    32131139285 (32131139681 Rmfd) is for 03/92 - 06-96 530 and 540 only, wonder what is up with that? Probably clearance issues. *has 7 bolts on top.

    32131121813 (rebuilt) is for your car, supercedes 32131139735, 32131137505, 32131135629 and 3213114265 *has 4 bolts on top.

    So if you ebay search you might want to search all numbers that fit your car. 4 bolts fit your car 7 bolts don't.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  7. #7
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default

    Hey Jeff, I ordered this

    http://www.ebay.com/itm/221841846821

    Hopefully tightens things up. I'll let you know.

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  8. #8
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    Looks like that unit comes w/servotronic.... Not sure how the box acts with that not hooked up. It also says nothing about being rebuilt, just seals and bearing. The only other one I saw that rebuilds them costs 350 + 250 core! I didn't do a lot of research on this though.

    I don't like that part numbers these guys use, no way to cross that with the stock #s. Let's hope for the best.

    Edit: Also says it fits 94 & 95 530 which goes contrary to what I found in the above post I made. No pictures of the adjustment side of the box to see if it's 4 bolts or 7.
    Last edited by 632 Regal; 06-02-2016 at 01:12 PM.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  9. #9
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default

    Quote Originally Posted by 632 Regal View Post
    Looks like that unit comes w/servotronic.... Not sure how the box acts with that not hooked up. It also says nothing about being rebuilt, just seals and bearing. The only other one I saw that rebuilds them costs 350 + 250 core! I didn't do a lot of research on this though.

    I don't like that part numbers these guys use, no way to cross that with the stock #s. Let's hope for the best.

    Edit: Also says it fits 94 & 95 530 which goes contrary to what I found in the above post I made. No pictures of the adjustment side of the box to see if it's 4 bolts or 7.
    Its 4 bolts. Not sure why it lists 530, but if you choose 540, it states it doesn't fit. The servotronic can be left unconnected. I did some research and many others have disconnected servo from from cars that were spec'd with it as they found it better. Regarding rebuilding internals, I could not find a source that confirmed they replaced internals.

    We'll see how it goes.....

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  10. #10
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    Very interesting. Take some pictures of your old box and the new one. Include if they have part numbers too.

    Here is what I found quickly searching ebay:

    http://www.ebay.com/itm/BMW-E34-525i...lWcgYV&vxp=mtr

    Right now that's the only rebuilt one out there for 525/535 E34.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Page 1 of 2 12 LastLast

Similar Threads

  1. Looking for a decent 5er for my Son
    By Jehu in forum 5 Series BMW
    Replies: 34
    Last Post: 09-02-2007, 07:51 PM
  2. 735i Decent car???
    By aston_jag_tech in forum 5 Series BMW
    Replies: 4
    Last Post: 09-09-2006, 11:31 AM
  3. How much for a decent tinting?
    By NitrousO in forum 5 Series BMW
    Replies: 11
    Last Post: 09-04-2006, 03:52 AM
  4. Is this a decent deal?
    By bdonkersgoed in forum 5 Series BMW
    Replies: 17
    Last Post: 08-12-2004, 08:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •