I did that on my E32 750 for a test.
prototype PVC oil catcher for M70
The crankcase vent valve of my E46 needs to replace because there is lot of oil in the intake manifold . Instead of replacing the vent valve, I am planning to install oil catch tank to avoid the coming of oil from the engine's breather going to intake manifold. More economical and may last forever.
I just found some more pics from 750, oil catchers selfmade
ImageShack® - Online Photo and Video Hosting
just a long tube
ImageShack® - Online Photo and Video Hosting
or this http://imageshack.us/photo/my-images...cvfoto2yx.jpg/
with float http://imageshack.us/photo/my-images/90/m70pcv27pv.jpg/
Last edited by shogun; 07-25-2013 at 04:13 AM.
yes, because it is like a big circle, the air will move to the other side but the oil will not move over to the other side.
But best is you have a can with inlet and outlet.
Here is a good example from Mustang S197 Mustang PCV Oil Separator Kit [DM-S197OS] - $55.95 : DAVAD Motorsports, Where Quality Meets Performance
http://www.ebay.com/itm/Oil-Separato...-/121122320391
Last edited by shogun; 07-25-2013 at 07:39 AM.