For the M30, can anyone tell me what the thread (rating/number) is on the 6mm X35mm bolts that attach the wather pump to the engine block? Stealer doesn't stock them and will only order in packs of 10. I only need 3 of the 6.
1990 535i 5-sp., except for 16" M-Contours, cd deck, and clear corners, completely stock. 226k and running strong
I can find the proper length/diameter bolts at Auto Zone, Ace Hardware, just about anywhere. I'm trying to confirm whether or not the thread is 1,0 or not so I don't screw up the block threads. BMW parts dept. couldn't (or wouldn't) tell me.
1990 535i 5-sp., except for 16" M-Contours, cd deck, and clear corners, completely stock. 226k and running strong
Looked up the part number. Found it'd been superceeded by part # 07119904589. Looked it up at a few places and found that Pelican had this as a description.
Looks to me like it's a 1.0 thread bolt. Can't you take one with you and make sure the threads match?M6X35-U1-8.8
Cosmos Black/Black 1995 540iA M-Sport
BMW Individual Exclusive Edition, 1 of 65 total, 9/25/95 Build
Those bolts are off the shelf; no special thread pitch. I don't remember what pitch it is.
Ken, from Melbourne AUS.
'89 535iA with a 5 speed swap.