GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Anyone parting out a 525it or 520i Touring?

  1. #1
    Join Date
    Dec 2003
    Location
    Canada, ON
    Posts
    732

    Default Anyone parting out a 525it or 520i Touring?

    I need the complete brake booster / master cylinder / reservoir / hoses linkage...

    And the trunk cover. And some odd stuff.

    Thanks.
    '85 Euro 635csi Race Turbo, megasquirt, Group A
    '92 525i Touring 5 speed, 3.46 diff, UUC 8.5lb flywheel, soon to be turbo.
    '02 Subaru WRX Wagon with STI springs, bigger sway bars

  2. #2
    Join Date
    Dec 2003
    Location
    Austin
    Posts
    1,087

    Default

    I may buy one I know of a 525iT in austin. I need the seat heaters and the roof rails and was planning on using the carcass to cut up for a trailer.

    The breaker was going to remove the engine and drivetrain. lemme give them a call and maybe you can have them pull it and send it to you.

    ~6 speed~ Rear Fogs ~ Shadowline ~ Tow Package ~ OEMMM///S38B38

  3. #3
    Join Date
    Dec 2003
    Location
    Canada, ON
    Posts
    732

    Default

    Quote Originally Posted by Elekta View Post
    I may buy one I know of a 525iT in austin. I need the seat heaters and the roof rails and was planning on using the carcass to cut up for a trailer.

    The breaker was going to remove the engine and drivetrain. lemme give them a call and maybe you can have them pull it and send it to you.
    This would be great, I need the whole thing though down to the connector that goes to the brake pedal all the way to the end of the master cylinder with the hoses and all.


    All that stuff + the master cylinder and the reservoir :-)

    This is for the race car to remove the old hydraulic booster.
    '85 Euro 635csi Race Turbo, megasquirt, Group A
    '92 525i Touring 5 speed, 3.46 diff, UUC 8.5lb flywheel, soon to be turbo.
    '02 Subaru WRX Wagon with STI springs, bigger sway bars

  4. #4
    Join Date
    Dec 2003
    Location
    Austin
    Posts
    1,087

    Default

    sent email to breaker. I am trying to talk him into letting me break out the car and still keep it at his yard. What do you want to pay for brake stuff with fed ex ground, as I may be able to get him to pull it and send it to you directly ( and let him keep the money in exchange for letting me keep the car there )

    ~6 speed~ Rear Fogs ~ Shadowline ~ Tow Package ~ OEMMM///S38B38

  5. #5
    Join Date
    Dec 2003
    Location
    Austin
    Posts
    1,087

    Default

    Here's what he wrote me

    I'd sell the booster/reservoir/master cylinder for $300. I would include lines going to the ABS pump, but not the ABS pump or lines out of it. We'd have to work something out depending on what else he needs. All we're interested in is the diff, engine, trans, & control units. It will likely be a few weeks before I can get to it, but the deal as previously discussed still stands


    He won't let me work on it in his yard, so I still have to work out a landing area for the car before I can pull stuff for you....we will have to talk in a week or so.

    more later

    ~6 speed~ Rear Fogs ~ Shadowline ~ Tow Package ~ OEMMM///S38B38

  6. #6
    Join Date
    Jun 2008
    Location
    Florida
    Posts
    81

    Default

    Hey..
    I need all window motors and regulators except for the rear passenger. Plus I need the motor for the double sunroof. If you guys don't need any of this stuff I am willing to buy them.

    just send me a pm
    Last edited by elbasha; 02-28-2009 at 05:08 PM.

  7. #7
    Join Date
    Dec 2003
    Location
    Austin
    Posts
    1,087

    Default

    Quote Originally Posted by elbasha View Post
    Hey..
    I need all window motors and regulators except for the rear passenger. Plus I need the motor for the double sunroof. If you guys don't need any of this stuff I am willing to buy them.

    just send me a pm
    will do. I am removing the entire sunroof cassette, motors everything. It will be replaced with a canvas pull back...anyone know where to get one of those made?

    ~6 speed~ Rear Fogs ~ Shadowline ~ Tow Package ~ OEMMM///S38B38

  8. #8
    Join Date
    Jun 2008
    Location
    Florida
    Posts
    81

    Default

    Great will be waiting

  9. #9
    Join Date
    Oct 2004
    Posts
    3,395

    Default

    I have two parts tourings and a few sets of touring brake components left over from engine conversions...

    Drop me an email or a PM if Geoff can't hook you up...

  10. #10
    Join Date
    Dec 2003
    Location
    Canada, ON
    Posts
    732

    Default

    Quote Originally Posted by Elekta View Post
    Here's what he wrote me

    I'd sell the booster/reservoir/master cylinder for $300. I would include lines going to the ABS pump, but not the ABS pump or lines out of it. We'd have to work something out depending on what else he needs. All we're interested in is the diff, engine, trans, & control units. It will likely be a few weeks before I can get to it, but the deal as previously discussed still stands


    He won't let me work on it in his yard, so I still have to work out a landing area for the car before I can pull stuff for you....we will have to talk in a week or so.

    more later

    Keep me posted, I still want the complete brake assembly and some odd stuff.
    '85 Euro 635csi Race Turbo, megasquirt, Group A
    '92 525i Touring 5 speed, 3.46 diff, UUC 8.5lb flywheel, soon to be turbo.
    '02 Subaru WRX Wagon with STI springs, bigger sway bars

Page 1 of 2 12 LastLast

Similar Threads

  1. Haven't been on in ages - Parting out a 93 525iT!!!
    By 525iT_Feen in forum 5 Series BMW
    Replies: 1
    Last Post: 05-30-2009, 01:34 AM
  2. I'll be parting out my Touring
    By DaveCN in forum 5 Series BMW
    Replies: 8
    Last Post: 01-17-2009, 08:13 PM
  3. About to Buy 1995 520i Touring
    By johncelliot in forum 5 Series BMW
    Replies: 0
    Last Post: 05-05-2005, 08:43 AM
  4. 520i Touring
    By Unregistered in forum 5 Series BMW
    Replies: 0
    Last Post: 06-07-2004, 07:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •