Results 1 to 4 of 4

Thread: How to replace AC fan? & AC doesn't work on 1 or 2.

  1. #1
    Join Date
    Jun 2008
    Location
    Florida
    Posts
    81

    Default How to replace AC fan? & AC doesn't work on 1 or 2.

    Hey there,
    My AC's fan is making an annoying noise, and the AC when I have it on 1 or 2 it would last maybe 30 seconds and then turns off, comes back on by itself after another 30 seconds or so. I have to keep it on 3 or 4 to be on, sometimes at 3 it would turn off too. I have to put it at 4 for some time then go back to 3.

    Now I read while searching on the forum something about a resistor that solves this problem? I am not sure, if anyone can let me know that would be great.

    I couldn't find instructions on bmwe34.net for replacing AC fan, and to replace whatever the other problem is.


    Thanks in advance.

  2. #2
    Join Date
    Feb 2004
    Posts
    4,892

    Default

    Yes, but on your car, I am not sure if you got resistor or sword. It is either one of the two.

    Is your fan noisy on 4? If no, then just change the above parts and your microfilter.

  3. #3
    Join Date
    Jun 2008
    Location
    Florida
    Posts
    81

    Default

    noise is there if it is on 1 or 4 doesn't matter. So what exactly would need to be changed?

  4. #4
    Join Date
    Jan 2005
    Location
    Melbourne Australia
    Posts
    326

    Default

    first do a check on 'sword'. yours is a 93 and should have a sword not a resistor pack used in the last few models. the sword is the speed controller, reducing the voltage to the fan by using a few 'moffsets' these things do burn out over time, the procedure to replace is posted on this forum a number of times, costs about $20 and takes 2-3 hours depending on skill level.

    Strongly reccomend replacing Microfilter at the same time.

    Good Luck
    1994 540i Auto

    live fast; die sideways
    13.3 @ 104mph (not in the 540)
    15.4 @ 150 Kph in the 540 (24/9/07)

Similar Threads

  1. Can I replace the clock with an OBC
    By duby55 in forum 5 Series BMW
    Replies: 2
    Last Post: 02-13-2009, 11:09 PM
  2. Replies: 8
    Last Post: 08-13-2004, 03:55 PM
  3. Crankshaft Sprocket: Replace or don't replace?
    By Hector in forum 5 Series BMW
    Replies: 26
    Last Post: 05-18-2004, 03:14 PM
  4. gut the cat/replace the cat
    By Unregistered in forum 5 Series BMW
    Replies: 13
    Last Post: 04-28-2004, 07:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •