go to my website below, link to GALE, he has listed it all for a 535/735
Hello Everyone,
I have been searching the forum and I am stuck. I have a doner car available and I need to know what parts I need to take from it to do a 5-speed conversion....I know the tranny, shifter, diff,....is there anywhere that there is a list of these items, so I don't forget anything.
Thanks Maurice
1989 BMW 525 - M20--119,000.00-Original KM - now 5-speed
go to my website below, link to GALE, he has listed it all for a 535/735
Ok I got all the parts from the doner car:
tanny
shifter parts
drive shaft
rear diff
peddal assembly
all hydraulic lines (will have to replace some lines)
fly wheel
wires for reverse switch
I started yesterday taking my car apart so far I have taken out the tranny, drive shaft and automatic shifter assembly. This conversion looks straight forward.
If there is any advice or things i should look at while doing this conversion please feel free to tell me.
I have noticed a little oil leak on my oil pan so I am going to change the oil pan gasket and I am going to change the rear oil seal aswell.
If there are any pionters on the electrical Auto to Manual that would help greatly....I know the info's here in the forum just have to read.
Thanks for any help in advance
1989 BMW 525 - M20--119,000.00-Original KM - now 5-speed
Oooops.... I think I took a pic exactly like what you have... hehehe! Sorry for the confusion.... I'll look for the pic and post the pic I'm talking about.. Sorry for the OT..
Last edited by sneekens; 08-21-2008 at 09:26 AM.
Thanks for the compliments but no I grabbed nothing from no one that picture is my car and work is done by me.
Click the link and se for yourself
http://www.cardomain.com/ride/2390887
1989 BMW 525 - M20--119,000.00-Original KM - now 5-speed
Give me 1 min and I will be back with a picture for you.
1989 BMW 525 - M20--119,000.00-Original KM - now 5-speed
Anyways, Nice engine bay you have there!! I love your exhaust manifold!! Sorry again for the confusion....