Transmission mounts replacement writeup

[yaofeng]

Here is the write up:

1. 3/8" drive rachet with a 13 mm socket to remove the nut.
2. Repeat 6 times.
3. Install two rubber mount.
4. Tighten all nut to 20 ft-lbs.

The picture is for the 6 speed. The auto is similar, only the bracket is a little longer.

[dauchande]

Has anyone done a writeup on changing the transmission mounts? I saw the article on bmwe34.net on changing the motor mounts, but it doesn't go into changing the transmission mounts (I have an auto).