Here is the write up:
1. 3/8" drive rachet with a 13 mm socket to remove the nut.
2. Repeat 6 times.
3. Install two rubber mount.
4. Tighten all nut to 20 ft-lbs.
The picture is for the 6 speed. The auto is similar, only the bracket is a little longer.
'01 540it, 6/01
'03 325i 5 speed, 9/02
'10 535ix. 9/09
'10 mini 6 speed
'15 mini countryman 6 speed
Has anyone done a writeup on changing the transmission mounts? I saw the article on bmwe34.net on changing the motor mounts, but it doesn't go into changing the transmission mounts (I have an auto).