5-10 Grand Master
couple pics of my 633
i made a custom cluster out of the old one, partially because if the cable drive speedo and partially because it's cool, ill take some real pics when it's done but for now these resized camera phone jobs will do
m30b35 from a 90 535 and the 5 speed that came with it
all america wants is cold beer warm cat and a place to take a poop with a door on it
5-10 Grand Master
clean ass m30
ya gotta get a little creative as the modern m30 doesn't have the back 2 bolts on the right side for the mount bracket, they eliminated them from the block casting but i overcame it with a piece of 1/4" plate bolted to the other 3 free holes and threaded the bracket so i could bolt the back two holes on, not that it needed it but as extra insurance i welded a strip of metal to the back of the bracket for strength
Last edited by winfred; 08-11-2007 at 09:23 PM.
all america wants is cold beer warm cat and a place to take a poop with a door on it
2 Grand Master
Good work Winfred.
Green Beret Special Ops
As innovative as always, I dont understand the part of reinforcing the mount tho...maybe im blind or something
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
5-10 Grand Master
without a plate to bolt the bracket to it would only be bolted to two holes in the block (the motor mount bracket is not that whole thing, the crappy pic doesn't really show it well, the bracket is only the back 4 bolts, the front part is the steel plate i bolted the bracket to) and either bend the motor mount bracket or snap a boss off the block, back in the day m30s had more holes in thempart of the fun of installing a 90 engine into a 81 car, for my next trick functioning motronic 1.3 in a L-jetronic car
Originally Posted by 632 Regal
Last edited by winfred; 08-11-2007 at 10:22 PM.
all america wants is cold beer warm cat and a place to take a poop with a door on it
Grand Master
Good work and Good luck.
InDEuroz | e34 540i/6 '94 w/ bore/stroked m62 | e30 325iS '87 | Ducati 748R '00
Major Contributor
awesome man. i want to pick up an E24 someday before they are all junk.
Mark
1999 M3 Cosmos Black/ Black 78k
1994 540i Oxford Green/ Silver Grey Sold @ 133k
1995 M3 Arctic Silver/Black Sold @ 117k
1990 325i Zinnobar Red/Black Sold @ 115k
Grand Master
that is one sweet ride!
1994 540ia|Oxford Green Metallic|Lemforder|KYB in H&R|18" OE Staggered M-Parallel with Pirelli P-Zero
Grand Master
vveerry nice!!!
HID 5000k low 3000k fogs
dynaudio seps. mc intosh amp
ACS w/yokohama advan sport tires
Race logic TractionControl
5-10 Grand Master
it's alive
wiring wasn't that bad to get the e34 engine harness hooked into the 81 633 body harness
heres a early test confirming that the computer was happy and communicating
hehehe i even have a functioning check engine light and of all things the 1981 tach and temp gauge seem to be working (no coolant yet but i hit the temp sender with a torch for a second and the gauge came up) i used the engine temp light wire for a check engine light
Last edited by winfred; 08-12-2007 at 09:10 PM.
all america wants is cold beer warm cat and a place to take a poop with a door on it
Posting Permissions
Reply With Quote
