just go out and buy an entire set of torx bits, you will need them all someday
Ok I'm thinking of doing a trans filter and ATF change,have done research on it and have one question.
The bolts that hold the filter on ,do I need and 27 torx screwdriver? is that the right size.
Thanks
89 535 272,000km auto Euro
just go out and buy an entire set of torx bits, you will need them all someday
Mark
1999 M3 Cosmos Black/ Black 78k
1994 540i Oxford Green/ Silver Grey Sold @ 133k
1995 M3 Arctic Silver/Black Sold @ 117k
1990 325i Zinnobar Red/Black Sold @ 115k
x2Originally Posted by markus
HID 5000k low 3000k fogs
dynaudio seps. mc intosh amp
ACS w/yokohama advan sport tires
Race logic TractionControl
what type of transmission do you have?
bilstin HDs, eiback prokit, K&N instert, DEPO fogs, sound system, zimmerman rotors, metal master
I have a dip-stick so I guess I have the 4HP22 auto. I want to make sure I know what i'm doing before I start undoing things
My ATF has not been changed in 30,000KM and this time I want to do It myself ,to make sure the filter gets changed and not just drained and refilled.
I have been going through the gas lately and have found out that my car does not change into 4th until 65KM!. So 90% of the time I'm in 3rd,so hoping this filter change helps and I hope my tranny is not dying....Poor old gal.
89 535 272,000km auto Euro
i have a dipstick on my car and it's an A4S but i have an american model.
have you seen this page?
http://tech.bentleypublishers.com/se...TFCapacity.pdf
bilstin HDs, eiback prokit, K&N instert, DEPO fogs, sound system, zimmerman rotors, metal master