if the plugs wires and cap/rotor are old id change them and see where it stands
I have noticed that when I first start my bimmer it has a miss. The miss will continue until the engine is really warmed up and I stop the car for 5 to 15 minutes and shut the engine off. If I get back into the car when it is still warm and start the engine there is no miss. Whats up with that?
if the plugs wires and cap/rotor are old id change them and see where it stands
all america wants is cold beer warm cat and a place to take a poop with a door on it
Whats so special about Bimmer ignition wire that a set cost $200 big ones.
You ow me 50% of the savingsOriginally Posted by Kibokojoe
US $89.95
Tailor Resistor Wires [Manufacturer: BREMI (Germany) -
http://cgi.ebay.ca/Wire-Set-85-93-BM...QQcmdZViewItem
Ha another Ebayer making up for a low price with shipping. At that price for shipping I should have them within a hour :-).
Originally Posted by shogun
Read it carefully.
The price of 37 $ is for shipping to GERMANY. I selected that cause someone in Germany asked for that. You have to switch to shipment within USA at the bottom, and that says
US $12.95 within U.S.
US Postal Service Priority MailŪ
2 to 3 business days*
Cool