Looking at the connector back side with the wires pointing down; left to right: blk/gy/yw-brn- violet.
...the temp sensor connector for the auxiliary cooling fan circuit....
My connector crumbled in my hands when I removed my radiator last week and I dont know where the 3 wires go....Pin 1 Brown(ground), Pin 2 Violet/Gray(Low Speed), Pin 3 Black Gray yellow(High Speed)...
If anyone could show/tell me where all three wires go I will send you a hallmark with my appreciation....and my number.. ;0
Thanks a lot!!
Looking at the connector back side with the wires pointing down; left to right: blk/gy/yw-brn- violet.
"The gas pedal wouldn't go to the floor if it weren't meant to be there"
here's a pic:
brown is bottom-middle (ignore the bare copper jumper)