Hey guys,
I am trying to gain access to the micro switches in my rear hatch. I have the inside cover off that houses the tool kit, do I have to take the tail lights out to get the black cover off where the actual key buttons are.
Thanks,
Edward
Hey guys,
I am trying to gain access to the micro switches in my rear hatch. I have the inside cover off that houses the tool kit, do I have to take the tail lights out to get the black cover off where the actual key buttons are.
Thanks,
Edward
I think the harness is fine because the previous owner repaired it and I get voltage going into the switch but when I activate the switch I don,t get any voltage coming out. I put an ohm meter on it as well and resistance goes up when I activate the switch. Any thoughts anybody.Originally Posted by attack eagle
Thanks,
Edward