I've never triedto get acess to the switches them selves.
What is the issue you are having, and are you sure it isn't because of the normal failed hatch harnesses? All my problems were
Hey guys,
I am trying to gain access to the micro switches in my rear hatch. I have the inside cover off that houses the tool kit, do I have to take the tail lights out to get the black cover off where the actual key buttons are.
Thanks,
Edward
I think the harness is fine because the previous owner repaired it and I get voltage going into the switch but when I activate the switch I don,t get any voltage coming out. I put an ohm meter on it as well and resistance goes up when I activate the switch. Any thoughts anybody.Originally Posted by attack eagle
Thanks,
Edward