GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 9 of 9

Thread: Anyone tried the sword repair procedure on bruno's site?

  1. #1
    Join Date
    Dec 2003
    Posts
    1,640

    Default Anyone tried the sword repair procedure on bruno's site?

    Looks like there's a way to fix a bad blower sword.

    Anyone tried it? I'd rather do that vs. spend $140 for a rebuilt one. However, I don't want to mess it up and a) have to buy one and b)be out a usable core.

    Jeff
    Bellevue WA
    90 535iM - not much stock remains. 3.7 liters, ported head, cammed, 3.73 diffy, M5 brakes, MAFed, yadda yadda yadda
    86 Porsche 951 - Track Toy

  2. #2
    Join Date
    Apr 2004
    Location
    Sydney, Australia
    Posts
    88

    Default

    http://www.bimmerboard.com/forums/posts/91956

    Shogun posted this up, because I am attempting the same fix...

  3. #3
    Join Date
    Jul 2005
    Location
    Adelaide Australia
    Posts
    171

    Default

    bronos fix is one problem that may exist and shogun/pundit fix is another problem that may exist mine was the second and i have had no problems since repair

    kev535i south oz

  4. #4
    Join Date
    Jul 2006
    Location
    New Hampshire
    Posts
    7

    Default

    I did the sword repair using the info on Bruno's site. Before the repair, I had speed 4 only, and the motor sounded like it was dying, speed fluctuation, lots of noise. After the sword repair, it still only had speed 4, but the motor sounded fine (??!!!). I then removed the IHKR from in front of the heater box, and found corrosion on the pins on the top LH white connector. After I cleaned that up, the system worked correctly.

  5. #5
    Join Date
    Dec 2003
    Posts
    1,640

    Default Mine works occasionally at the lower speeds...

    90% of the time, I only get speed 4 but sometime the other speeds will work.

    I wonder if this is the mosfet problem or the problem Shogun outlines?

    Good tip on checking the connections too.
    Bellevue WA
    90 535iM - not much stock remains. 3.7 liters, ported head, cammed, 3.73 diffy, M5 brakes, MAFed, yadda yadda yadda
    86 Porsche 951 - Track Toy

  6. #6
    Join Date
    Dec 2006
    Location
    Adelaide Hills
    Posts
    75

    Default

    I also had the classic sword problems - blower only working on high, intermittent at other times. Pulled the sword, soldered all the suspect joints ......... Maybe I'm just a klutz because then nothing worked at all. I have no idea whether I may have overheated some of the electronic bits or what. Anyway, I ended up buying one off Ebay, USD$100 with a 2 year warranty. Works fine. I am now practicing my soldering skills on other stuff .......

  7. #7
    Join Date
    Apr 2004
    Location
    DFW
    Posts
    372

    Default

    yeah, over a year later my fan control works flawlessly

  8. #8
    Join Date
    Aug 2004
    Location
    Regional NSW, Australia
    Posts
    1,177

    Default

    Quote Originally Posted by Jeff N.
    Looks like there's a way to fix a bad blower sword.

    Anyone tried it? I'd rather do that vs. spend $140 for a rebuilt one. However, I don't want to mess it up and a) have to buy one and b)be out a usable core.

    Jeff
    The Pundit (Shogun) fix is fantastic and cannot harm your sword, so try it first.
    I found after a few months that my soldering wasn't up to scratch so I removed it and got an auto-electrician mate to solder it properly - wonderful.


    "I'm not the village idiot.
    But when he retires I'm next on the list."

  9. #9
    Join Date
    May 2005
    Location
    Tampa
    Posts
    40

    Default

    I didn't try that one, was worried about the same issue as you. What I did do was pull the sword and clean it with alcohol pads. After that it worked fine for about a year before I ended up buying a used one off ebay for $100 and a 2 yr warranty much like someone else said.
    CK1995
    E34 525i M20 1990
    E36 323is 1998

Similar Threads

  1. Bruno's E34.net Site Down?
    By MBXB in forum 5 Series BMW
    Replies: 4
    Last Post: 12-19-2004, 08:30 AM
  2. Replies: 1
    Last Post: 08-03-2004, 09:44 PM
  3. Is Bruno's site down? (nt)
    By Robin-535im in forum 5 Series BMW
    Replies: 0
    Last Post: 08-02-2004, 07:08 PM
  4. Replies: 1
    Last Post: 02-26-2004, 02:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •