GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 6 of 6

Thread: replacing valve cover gaskets

  1. #1
    Join Date
    Oct 2006
    Location
    NEPA
    Posts
    936

    Default replacing valve cover gaskets

    hey guys. to the poeple who have done this on the M60. would it be wise to get the upper inner gasket that goes around the coil packs or no?

  2. #2
    Join Date
    Mar 2006
    Location
    USA
    Posts
    1,839

    Default

    yes, and the throttle body gasket too, and all new bolts that you will probably strip.
    Alusil, Dinan DME | ITG Air Filter | Eibach/Bilstein HD | 26/20 Swaybars | Iridium plugs | Depo/ProLumen HID | Optima batt. | no AC | Stoptech brake lines, Frozen rotors, brass bushings, Superblue

  3. #3
    Join Date
    Oct 2005
    Location
    Wichita, KS
    Posts
    139

    Default Definitely do the inners

    Mine were seeping when I got to them - lots of oil around the plugs. Make sure the valve covers are real clean in the grooves for the new gaskets too. Being aluminum heads, it is worth it to crack the plugs loose, check, and retorque with a very little fresh antiseize. I never touched any of the induction gaskets (throttle body, or others as mentioned in another post). Unless they're leaking - leave em be.
    May the Schwarz be with you...

  4. #4
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    those come with the valve cover gaskets. Make sure you replace both intake end seals while you do the intake gaskets.

    Quote Originally Posted by markus
    hey guys. to the poeple who have done this on the M60. would it be wise to get the upper inner gasket that goes around the coil packs or no?
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  5. #5
    Join Date
    Oct 2006
    Location
    NEPA
    Posts
    936

    Default

    im waiting for that job when the weather gets warmer. but yea n intake re-seal is on the to-do list. my car idles like crap in this cold weather.

  6. #6
    Join Date
    Aug 2005
    Posts
    593

    Default

    Do 2.0L and 2.5L M50 engines share the same valve cover gaskets? Realoem gives the same part number.
    2.0L http://realoem.com/bmw/showparts.do?...83&hg=11&fg=15
    2.5L http://realoem.com/bmw/showparts.do?...83&hg=11&fg=15

    I am asking because a CRP gasket on bmaparts seems to have a different part number:
    http://www.bmaparts.com/epcvsoapimc....entid=bmaparts
    CRP is a good brand right if valve cover gaskets, right?
    1994 520i with M50 engine, manual transmission and air conditioner.
    VIN: GG45422

Similar Threads

  1. Finished changing both valve cover gaskets,
    By Bo525i in forum 5 Series BMW
    Replies: 10
    Last Post: 12-10-2009, 08:26 PM
  2. M60 valve cover gaskets this weekend
    By markus in forum 5 Series BMW
    Replies: 4
    Last Post: 03-24-2007, 06:22 AM
  3. Valve Cover Gaskets
    By hinchcliffe in forum 5 Series BMW
    Replies: 15
    Last Post: 01-01-2007, 04:19 PM
  4. Valve cover gaskets - replace or not?
    By pingu in forum 5 Series BMW
    Replies: 3
    Last Post: 05-27-2006, 10:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •