GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: Valve Soak - via FPR - where is FPR?

  1. #1
    RobPatt 525ia-M50TU@121K Guest

    Default Valve Soak - via FPR - where is FPR?

    Want to suck the Ventil Stabil (sp?) through my FPR on the M50TU, to try to alleviate some pinging. Will also run some Techron in the gas, and an Italian tune up on I-10 to Pensacola.

    ?: 1. Where is the FPR on the M50TU?

    Otherwise, I've read the procedure(s) here before, and think I will do the 10 minute soak, then start the engine again. Any help appreciated. TIA
    Rob.

  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    i read that you can soak the injectors in cleaner and use a 9 volt battery to move the plunger back and forth...sounds like a spark might not be a good thing so dont do it inside your house.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Similar Threads

  1. Replies: 2
    Last Post: 03-25-2009, 07:47 PM
  2. 530i heat soak - another take
    By GerryP in forum 5 Series BMW
    Replies: 0
    Last Post: 03-14-2008, 07:53 PM
  3. So tell me all you know about heat soak...
    By oharab in forum 5 Series BMW
    Replies: 23
    Last Post: 12-30-2006, 01:28 AM
  4. question about hot soak
    By ejhiggins in forum 5 Series BMW
    Replies: 9
    Last Post: 01-13-2005, 10:09 PM
  5. going to do hot soak tomorrow
    By BennyM in forum 5 Series BMW
    Replies: 16
    Last Post: 11-25-2004, 11:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •