change the plugs and fuel filters, what is the code your getting? I can almost bet that you have intake leaks, you will know for sure once it starts getting cold out.
Hi Everyone,
It looks like owning a 1995 BMW 540i will a learning experience for me. The 540 drives well in every configuration except one. If I floor or step strongly on the gas the 540 stumbles and the check light comes on and goes out. I have driven the car over a hundred miles an hour no problem. I am thinking fuel or spark maybe the problem, any other ideas?
Thanks,
Len
change the plugs and fuel filters, what is the code your getting? I can almost bet that you have intake leaks, you will know for sure once it starts getting cold out.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
If it is stumbling in the lower rpm range i would bet on the coils/coil boots. Chage the plugs and fuel filter unless you know for sure that they are good.
After the Check engine light flashes can you get any codes?
--------------------------------------------------------------------------------------------------------------------------
use the search button or my name...there is your answer
No! there is not a code showing for this. I will have to fix the low beam + and windshield washer fluid low error first (maybe). Low beam + is resident in the info area.Originally Posted by neil_004
Thanks,
Len