GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 3 of 3

Thread: Steel Wheels from an E36??

  1. #1
    Join Date
    Jan 2004
    Location
    Cleveland, Ohio USA
    Posts
    58

    Default Steel Wheels from an E36??

    I could use the help of someone familiar with steel wheels.

    These are 6 1/2 x 15H2 with the following markings in the outside face of the wheel.

    IS 47
    SRD
    15120801
    03 (over) 99
    T3
    BMW
    1095 (over) 006

    When I checked RealOEM.com I could not find any of the above info, and I could not find any BMW Part Number on the wheel. These wheels have Blizzaks (sp) mounted, so if the p.n. is stamped on the inside rim, I could not see it. The plastic wheel covers resemble those for an E36 3 series.

    My initial thought is that they are not compatable because they are 6 1/2" vs 7"

    Thanks,
    Craig Wright
    Cleveland, OH
    89 535i

  2. #2
    Join Date
    Feb 2004
    Location
    Colorado Foothills
    Posts
    12

    Default

    Craig,
    I think this is the same wheel we have on our 1997 318i. I will try to check tonight. But, on Real OEM you will find both 6" and 6.5" steel wheels, silver or black for the e36. The offset of 47 is correct for a 6.5" wheel. If the bolt pattern is 5X120 then I would say they should fit any e36.

    If I can find those markings on my wheels I will post again.

    Scott

    Quote Originally Posted by Craig Wright
    I could use the help of someone familiar with steel wheels.

    These are 6 1/2 x 15H2 with the following markings in the outside face of the wheel.

    IS 47
    SRD
    15120801
    03 (over) 99
    T3
    BMW
    1095 (over) 006

    When I checked RealOEM.com I could not find any of the above info, and I could not find any BMW Part Number on the wheel. These wheels have Blizzaks (sp) mounted, so if the p.n. is stamped on the inside rim, I could not see it. The plastic wheel covers resemble those for an E36 3 series.

    My initial thought is that they are not compatable because they are 6 1/2" vs 7"

    Thanks,
    Craig Wright
    Cleveland, OH
    89 535i

  3. #3
    Join Date
    Jan 2004
    Location
    Elm Grove Farm, NC
    Posts
    770

    Default

    Craig,

    these are definitely E36 wheels. I have one (spare) on a 95 318iC. It will bolt up to an E34 but I'm not sure about clearance problems since the offset is different. You could use a 15-20mm spacer and longer bolts, but they are $$$$.


    Bret.

Similar Threads

  1. Anyone have E34 steel wheels?
    By Jon K in forum 5 Series BMW
    Replies: 8
    Last Post: 03-26-2008, 07:55 PM
  2. Steel Wheels-Will these fit??
    By Craig Wright in forum 5 Series BMW
    Replies: 0
    Last Post: 09-08-2006, 03:54 PM
  3. Winter Steel Wheels
    By Craig Wright in forum 5 Series BMW
    Replies: 3
    Last Post: 08-17-2006, 08:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •