from him, fit perfect and I even made a special tool for the job.
As I just recently sold the # 100 set in Japan, here the instructions once more (japanese language, but the pics help)
http://dd.jpn.org/BMW_HP/20060508/index.shtml
It started that I imported some sets for my friends in the E32 club here, but more and more people wanted to have it, as the dealer only sells complete door handles, not the gaskets only.
They fit to E32/E34/E36 and Z3
Here you can get them directly, I do not want to have any profit from that
http://cgi.ebay.com/ebaymotors/BMW-E...23116540QQrdZ1
from him, fit perfect and I even made a special tool for the job.
Vee ave vays of dealing vid your kind...........
Makes the car a complete new fit.
I hated that old stuff, and the water also goes into the inner side of the door
VERY nice! A lot easier to R/R that I would have thought. Might pick a couple sets of these up from you.Originally Posted by shogun
-Trevor Ely
'88 535is
'95 M Sport 540i (1 of 200)
'91 M5
Alright, finally doing this...Having the hardest time getting the little two piece cap off though. Without scratching anything, especially.Originally Posted by MTechnik540i
Any tips? Since everything on your DIY is in Japanese.
TIA,
-Trevor Ely
'88 535is
'95 M Sport 540i (1 of 200)
'91 M5
Somebody!!Originally Posted by MTechnik540i
-Trevor Ely
'88 535is
'95 M Sport 540i (1 of 200)
'91 M5
Damn! That easy? I waited all this time dreading about ripping out the door panel to access it...
There's a piece inside the door that locks the black outer trim piece into it's slots. You have to slide it forward or backward (can't remember which) to release the little tabs so you can pull the outer door handle cover out of the door.
If you still can't get it let me know and I'll see if I can take some pics of an old door I have around here.
Bret
Damn I might have to pick some of those up.
95 540iA: Euro Clears & More Mods to Come Soon!
Sacramento, CA USA