My passenger side cable is completely missing, so i would benefit from some of the same knowledge.
I just noticed that my seatbelt did not adjust as I moved my chair forward or backward. Took a look and noticed that the cable was cut about 2 inches from where it attaches to the clip. Did some research but could not find anything about fixing a cut cable. Will I have to replace the entire cable and will it be a pain? Or can I just re-connect the cable to the clip and and go my merry way. Would appreciate any suggestions and Thank you in advance.
Excess within control...
1995 BMW 525i
My passenger side cable is completely missing, so i would benefit from some of the same knowledge.
Lowered with blue h&r(?) springs, Bilsteins, tint, 19# design 3 injectors, Dual Magnaflow
southwest WA
i hardly ever reattach them they are non vital, i like the belt in the lower position, the ****er stays off my neck
all america wants is cold beer warm cat and a place to take a poop with a door on it
I have never done it, but maybe the easiest ist you buy a certain length of such cable and then use the original ends/hooks and solder or clamp them in.
Any hardware shop has such cables and sells by meter, inch or whatever.