GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: Control Arm Diagnosis

  1. #1
    Join Date
    May 2005
    Posts
    31

    Default Control Arm Diagnosis

    I have some questions about the front end of my 1989 535i (250,000km)

    I've been hunting through the posts, but would like a definitive answer... When the car is jacked up, should there be any movement in the ball joint of the lower control arm?

    There doesn't appear to be any movement on the right side, but my left side lower control arm ball joint moves a lot! I get a lot of clunking when traveling over smal bumps but haven't noticed the clunking when stopping symptom of worn out upper/thrust arm bushings.

    Car is beginning to get vague handling at 80 - 90 km/h

  2. #2
    Join Date
    Mar 2006
    Posts
    811

    Default

    There should be no movement in any of the ball type joints, including the tie rods. There can be detectable, but very small movement in the rubber bushings if pryed with a long prybar.

    Some manufacturers accept up and down movement as acceptable in a ball joint, but any side to side or in and out is not acceptable.

Similar Threads

  1. Got my 3rd E34,need some help on diagnosis
    By takumidrift30 in forum 5 Series BMW
    Replies: 6
    Last Post: 10-18-2006, 12:04 AM
  2. Car Died. Diagnosis?
    By liquidtiger720 in forum 5 Series BMW
    Replies: 56
    Last Post: 10-11-2006, 09:21 PM
  3. Clutch diagnosis help
    By dbals in forum 5 Series BMW
    Replies: 1
    Last Post: 07-05-2006, 07:09 PM
  4. BMW Doc's diagnosis... Or sort of anyway...
    By cableface in forum 5 Series BMW
    Replies: 14
    Last Post: 06-16-2006, 10:07 AM
  5. E34 ABS light diagnosis
    By UK E34 in forum 5 Series BMW
    Replies: 7
    Last Post: 10-12-2004, 06:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •