urgent!!

[1991 525i Novs]

im installing my eat chip, got the dme out and 4 screw of the top unscrewed, how do i get the top off, how far do i have to pull the while plastic pin on the back up, all the way out??? 405 is the dme help

[1991 525i Novs]

how do i seperate the 2 boards, on the e34.net site is say to pry from the front with the tabs, where are the tabs at????

im installing my eat chip, got the dme out and 4 screw of the top unscrewed, how do i get the top off, how far do i have to pull the while plastic pin on the back up, all the way out??? 405 is the dme help

[SchnellE34]

on the corner

[1991 525i Novs]

what do i have to do, i feel like im going to break it if i pry harder, all the way between or what please details

on the corner

[SchnellE34]

truthfully i've never installed a chip but am trying to help you out because you sound like you are about to bust a nut...

are you on this step?

[1991 525i Novs]

yeah at that step

i pry and pry and cant get it loose at all

truthfully i've never installed a chip but am trying to help you out because you sound like you are about to bust a nut...

are you on this step?

[SchnellE34]

are you prying outward? it says its only certain models, try moving on to the next step and unclip the white clips on the other side

[1991 525i Novs]

i did, it wont slide out, its suck up front, i dont know how hard i have to pull, its not sliding at all, stuck up from

[SchnellE34]

try looking at this http://www.aaa-car-imports.com/Chiptuning/High%20Performance%20Chip%20Installation.htm#engli sh

[1991 525i Novs]

thanks alot that is alot better, holy **** alot better.